1.Mechanical data and design
Product Mono-Crystalline Silicon Solar cell
Dimension (156.75±0.25)mm × (156.75±0.25)mm
Front(-) Alkali textured surface with dark blue silicon nitride AR coating
The front pattern with 5 busbars
Distance of 31.2mm between two (0.8±0.1)mm wide silver bus bars
Back(+) Aluminum back side suface
Distance of 31.2mm between two (1.6±0.2)mm wide Ag/Al bus bars
Monocrystalline silicon solar cells are 6” cells with high efficiency，reaches up to 21.0%. The dark blue anti-reflection coating on the front surface and good passivation on the rear surface result in an increases in both UV and infrared.
The electrical data apply to standard test conditions(STC):
Irradiance at the module level of 1000W/m2, with spectrum AM 1.5 and a cell temperature of 25℃
The above data are average figures presently measured. Reference data are calibrated by Fraunhofer ISE
4. Temperature Coefficient
5. Electrcial curve
IV-curve Spectral response
" Across-the-board soft handling during production to avoid microfissures and reduce breakage rating during onward processing.
High-quality, homogeneous appearance to visual checks of properties
Excellent long-term electrical stability through with crystalline silicon technology"
One package contains 1200pcs of cells.
* Specifications included in this datasheet are subject to change without prior notice.
Add: Lot CN-05. Van Trung Industrial Park. Bac Giang Province. Viet Nam
C/P: +84 949389810 Fax: +84 24 0381 8223